Product Introduction
Product Parameters
4k-hdmi USB HD video capture card |
|
Supported operating systems |
Windows Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64) Linux (supporting x86, x64 & arm architecture) Ubuntu 12.04/14.04/16.04/17.04/17.10/18.04 (x86 & x64) CentOS 6.5/7 (x86 & x64) Fedora 25/26/27 (x86 & x64) Red hat 6.5 and above (x86 & x64) Other Linux systems with kernel version greater than or equal to 2.6.35 Mac OS X 10.9/10.10/10.11 macOS 10.12/10.13 Chrome OS |
Recommended operating system (tested)
|
Windows Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64) Linux Ubuntu 12.04/14.04/16.04 (x86 & x64) Ubuntu 17.04/17.10/18.04 (x64) CentOS 6.5/7.2 (x86 & x64) Fedora 25/26 (x64) Red hat 6.5 (x86 & x64) Mac OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4 macOS 10.12/10.13.2/10.13.3 |
Supported APIs
|
Windows DirectShow Wave API/DirectSound/WASAPI Linux V4L2 ALSA OS X/macOS QuickTime AV Foundation |
Supported software
|
VLC VirtualDub OBS XSplit vMix VidBlaster Wirecast Microsoft Media Encoder Adobe Flash Media Encoder Any other coding or streaming software using DirectShow, v4l2, QuickTime, AV foundation programming interface |
Input interface |
HDMI DVI-D 1.0 HDMI 1.4 HDMI 2.0 3.5mm jack Microphone connector |
Host interface |
USB 3.0 Compatible with USB 2.0 Compatible with USB 3.1 Gen 1 |
Output interface |
3.5mm jack headphone jack |
Loop out interface |
HDMI DVI-D 1.0 HDMI 1.4 HDMI 2.0 |
Input characteristics |
Input video up to 4096x2160 resolution |
Characteristics of HDMI signal correlation |
600MHz HDMI receiver Adaptive HDMI equalizer Support custom EDID Support extracting infoframe information of AVI / audio / SPD / MS / VS / ACP / isrc1 / isrc2 / gamut Total colorimetry is supported Up to 4096x2160 4:4:4 60fps input signal Support 2-channel audio stream of iec60958 standard Support the extraction of audio format information and channel status data Support extracting video timing information Support extracting 3D format information Support side by side, half, top and bottom, frame packing 3D mode |
Analog audio function |
Separate the audio in HDMI and output it through 3.5mm headphone interface It can collect 3.5mm microphone audio Integrated with USB sound card function, it can play back through 3.5mm headphone interface and record the playback content of the machine |
Acquisition format |
The maximum acquisition resolution can support 4096x2160 pixels The maximum acquisition frame rate can support 120fps (the actual acquisition frame rate may be limited by USB bandwidth and internal working frequency. The typical acquisition frame rate on Intel USB 3.0 controller is as follows) 1920x1080 yuy2 acquisition up to 90fps 3840x2160 nv12 up to 30fps Support 4:2:0 8-bit acquisition format: nv12, i420 (up to 4096x2160) Support 4:2:2 8-bit acquisition format: yuy2, uyvy (up to 4096x2160) Support 4:4:4 8-bit acquisition format: RGB24, rgb32 (up to 2048x2160) The default is yuy2, nv12 acquisition format. You can set more acquisition formats through USB capture utility |
Video processing function
|
The bandwidth of video processing pipeline can reach 640m pixels / s Video clipping Video scaling Video deinterlacing The two scenes crisscross Two mixed Top field only Bottom court only Video aspect ratio conversion Automatic or manual selection of input video aspect ratio Select the aspect ratio of the captured video automatically or manually Three aspect ratio transformation modes: ignore (anisotropy), clip, fill (fill black edges up and down or left and right) Video color space conversion Automatic or manual selection of input color space and quantization range Automatically or manually select acquisition color space, quantization range and saturation range Support RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color space Support a limited or complete quantitative range Support limited, complete and extended gamut saturation range Video frame rate conversion Flip up and down or mirror left and right |
One machine with multiple devices
|
Support access to multiple USB devices in the same system The device can be set to the serial number as the device name displayed in the system through the USB capture utility |
SDK |
USB capture SDK provides functions such as acquiring signal status and setting acquisition options |
Firmware update |
Multiple devices in the same system can be upgraded at the same time |
LED indicator |
The status of LED light shows the working status of each channel Breathing: Leisure Always on: input signal locked Off: no input signal Flashing: memory error or FPGA configuration error |
size |
98.1mm (L) x 56.8mm (W) x 17mm (H) |
parts
|
USB 3.0 cable |
power waste |
Maximum current of 5V power supply: ~ 1.4A Maximum power consumption: ~ 7W |
work environment |
Operating temperature: 0 to 40℃ Storage temperature: - 20 to 70℃ Relative humidity: 5% to 90% (non condensing state) |