USB capture HDMI Gen2 acquisition stick 3.0 card second generation xi100dusb-hdmi

Supported operating systems

Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)

Linux (Ubuntu 12.04–16.10, CentOS 7)

OS X 10.9–10.11

macOS 10.12

Chorme OS

Supported APIs

Windows

DirectShow

Wave API/DirectSound/WASAPI

Linux

V4L2

ALSA

OS X/macOS

QuickTime

AV Foundation

Supported software

VLC

VirtualDub

OBS

XSplit

vMix

VidBlaster

Wirecast

Microsoft Media Encoder

Adobe Flash Media Encoder

Any other programming interface using DirectShow, v4l2, QuickTime, AV foundation

Coding or streaming software

Input interface

HDMI

DVI-D 1.0

HDMI 1.4a

Host interface

USB 3.0

Compatible with USB 2.0

Compatible with USB 3.1 Gen 1

Input characteristics

Input video up to 2048×2160 resolution

Characteristics of HDMI signal correlation

165mhz HDMI receiver

Adaptive HDMI equalizer, HDMI transmission distance up to 30 meters

Support custom EDID

Support extracting infoframe information of AVI / audio / SPD / MS / VS / ACP / isrc1 / isrc2 / gamut

Total colorimetry is supported

Support 8 / 10 / 12 bit color depth

Support RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling

Support 2-channel isc60958 standard audio stream

Support the extraction of audio format information and channel status data

Support extracting video timing information

Support extracting 3D format information

Support side by side, half, top and bottom, frame packing 3D mode

Acquisition format

The resolution of the collected signal can be up to 2048×2160 pixels

The maximum acquisition frame rate can support 120fps (the actual acquisition frame rate may be limited by USB bandwidth and

Internal working frequency, typical acquisition frame rate on Intel USB 3.0 controller is as follows)

one thousand nine hundred and twenty×1080 yuy2 up to 75fps

one thousand nine hundred and twenty×1080 RGB24 up to 60fps

Support 4:2:2 8-bit acquisition format: yuy2, uyvy

Support 4:4:4 8-bit acquisition format: RGB24, rgb32

The default is yuy2 acquisition format, and more acquisition formats can be set through USB capture utility

Video processing function

The bandwidth of video processing pipeline can reach 160m pixels / s

Video clipping

Video scaling

Video deinterlacing

The two scenes crisscross

Two mixed

Top field only

Bottom court only

Video aspect ratio conversion

Automatic or manual selection of input video aspect ratio

Select the aspect ratio of the captured video automatically or manually

Three aspect ratio transformation modes: ignore (anisotropy), clip, fill (fill black edges up and down or left and right)

Video color space conversion

Automatic or manual selection of input color space and quantization range

Automatically or manually select acquisition color space, quantization range and saturation range

Support RGB, YCbCr 601, YCbCr 709 color space

Support a limited or complete quantitative range

Support limited, complete and extended gamut saturation range

Video frame rate conversion

Flip up and down or mirror left and right

One machine with multiple devices

Support access to multiple USB devices in the same system

The device can be set to the serial number as the device name displayed in the system through the USB capture utility

SDK

USB capture SDK provides functions such as acquiring signal status and setting acquisition options

Firmware update

Multiple devices in the same system can be upgraded at the same time

LED indicator

The status of LED shows the working status of each channel: idle, input signal locked, memory error or FPGA configuration error

size

92.2mm (L) x 40.2mm (W) x 12.3mm (H)

parts

USB 3.0 cable

power waste

Maximum current of 5V power supply: ~ 0.5 A

Maximum power consumption: ~ 2.5 w

work environment

Operating temperature: 0 to 50℃

Storage temperature: - 20 to 70℃

Relative humidity: 5% to 90% (non condensing state)