Product Introduction
The SONY HD movement SDI encoding control board developed and designed by our company is specially developed and designed for SONY FCB HD integrated movement module. It can be compatible with SONY HD FCB-CV7310, FCB-CV7520, FCB-CX480CP, FCB -CX490EP, FCB-EV7500, FCB-EX48EP, FCB-EX480CP, FCB-EX1010PFCB-EX2700P and other movement modules. This coded control board is widely used and can be applied to intelligent flight equipment and medical equipment.
Product Parameters
1 Key Description
(1) Press and hold the key for 5-8 seconds to bring up the main menu of the camera.
(2) Flip up, down, menu options up and down
(3) Left, right, modify options, some menu options with the click of a key to modify
2 Main Menu
(1) SYSTEM SETUP System Settings
(2) CAMERA SETUP Camera settings
(3) V-OUT 720P-1080P video output format selection
(4) EXIT MENU Exit setting
3 Submenus
SYSTEM SETUP System settings
(1) COM PORT: 232 485 wire control mode selection
(2) PROTOCOL:V P D protocol selection
(3) BAUDRATE; 1200-9600 baud rate
(4) PROTOCOL EDIT: ENA DIS Protocol Modification Switch
(5) ADDRESS:0-127 Address setting
(6) INFO DISPLAY;OFF ON Message Display
(7) KEY LOCK;OFF ON Key Lock
(8) DEFAULT; Default Value Recovery
(9) SAVE AND EXIT; YES exit setting
(1) Press and hold the key for 5-8 seconds to bring up the main menu of the camera.
(2) Flip up, down, menu options up and down
(3) Left, right, modify options, some menu options with the click of a key to modify
2 Main Menu
(1) SYSTEM SETUP System Settings
(2) CAMERA SETUP Camera settings
(3) V-OUT 720P-1080P video output format selection
(4) EXIT MENU Exit setting
3 Submenus
SYSTEM SETUP System settings
(1) COM PORT: 232 485 wire control mode selection
(2) PROTOCOL:V P D protocol selection
(3) BAUDRATE; 1200-9600 baud rate
(4) PROTOCOL EDIT: ENA DIS Protocol Modification Switch
(5) ADDRESS:0-127 Address setting
(6) INFO DISPLAY;OFF ON Message Display
(7) KEY LOCK;OFF ON Key Lock
(8) DEFAULT; Default Value Recovery
(9) SAVE AND EXIT; YES exit setting