CM2004HW

1. This board supports both HDMI output and wireless transmission, the maximum support 4K/30 HDMI output and 4K/30 wireless transmission, if you need wireless transmission function, please with the purchase of the receiver.

2. through the LVDS line access to the HD integrated movement module, without any settings on the movement, can automatically recognize the display configuration of the camera output image. 3. at the same time support two RS485 and RS485, and also support the HDMI output and wireless map transfer.

3 at the same time support two RS485 interface a RS232-TTL an IO port a key control and other ways to control the camera, support power failure memory function, command transmission. 4.

4. control protocol support: SONY VISCA, PELCO-P, PELCO-D, AUTO (default) optional

5. Baud rate: 2400, 4800, 9600 (default), 115200 optional ID 1 (default)

6. video format support 720P50/60, 1080I50/60, 1080P25/30, 1080P50/60 and other formats

7. camera support access SONY FCB8530, 8300 and CM8418, 8420B and other 4K series of movement access

8. Size: 50MM * 50MM * 5MM

9. four positioning holes: 45MM * 45MM hole diameter 2MM