If the environmental brightness decreases to the threshold, the camera will automatically turn on the infrared light without manual adjustment. If you need to manually turn on the infrared light, please refer to the following steps:

1. For network camera/network dome, you can log in and access the camera through the web page, and set the day and night switch in the configuration, image, and display settings. Set the day and night conversion mode according to your actual needs.

Color image in "day" mode,

In "night" mode, it is black and white image,

"Auto" equipment automatically controls the day and night modes according to the brightness of the external environment

"Timed" users need to set the start time and end time of the day. During this time period, the camera will automatically use the day mode, and outside this time period, the camera will automatically use the night mode.

2. For analog camera/coaxial camera/analog dome/coaxial dome, it is recommended that you confirm whether the device supports menu calling, if so, call the menu, adjust the day-night switch in the image parameters, and set the day-night switch mode according to actual needs.