Camera corridor mode setting
Source:Shenzhen Kai Mo Rui Electronic Technology Co. LTD2020-06-04
Applicable scenarios: Corridor mode is mainly used in narrow scenes such as corridors. Normal installation can only shine on relatively close places. At the same time, both sides are walls. Only the middle part is actually useful. In order to avoid this situation, you can use corridor mode.
Note: The camera needs to be rotated 90 degrees to install.
Configuration method: To set the corridor mode, you need to access the camera IP address through the IE browser. The new version of the camera, after logging in, turn on the rotation in "Configuration"-"Image"-"Video Adjustment"-"Rotation", as shown in the figure below. If it is an old version, set it in "Configuration"-"Advanced Configuration"-"Image"-"Video Adjustment"-"Rotation".
Note: The camera needs to be rotated 90 degrees to install.
Configuration method: To set the corridor mode, you need to access the camera IP address through the IE browser. The new version of the camera, after logging in, turn on the rotation in "Configuration"-"Image"-"Video Adjustment"-"Rotation", as shown in the figure below. If it is an old version, set it in "Configuration"-"Advanced Configuration"-"Image"-"Video Adjustment"-"Rotation".
Related News
Fixed focus and zoom lens of camera
2020-05-08The difference between Sony small movement 11DP, 20DP, 12EP, 15EP
2020-06-05The difference between rolling exposure and global exposure
2020-06-05- 2020-06-05
- 2020-06-05
How to distinguish the authenticity of Hikvision HD network integrated camera
2020-06-05