Product Introduction
FCB-EV9500L
Point Focus, Point Burst, Point White Balance
Enable automatic focus, automatic burst, and automatic white balance (AF), The reference points for AE and AWB can be set in specific areas within the screen. Enable independent setting of any rectangular area as a reference area within the screen divided into 6x8 grid areas.
For example, if the target position is specified by the Spot AE function. The automatic burst level of the captured image is only affected by changes in the target area and is not affected by changes in brightness outside the area.
Wide-D
Wide-D mode is a method of dividing an image into several regions for correcting and increasing the brightness of dark areas, lowering the brightness of bright areas, and thus harmonizing the intense contrast between light and dark in the image. It enables capturing images with higher visibility in environments with strong contrast between light and dark, even when the target has strong contrast between light and dark, such as backlighting or containing particularly bright shooting areas.
Enhanced visibility (VE)
According to the different scene of the picture, the visibility enhancement function makes the dark parts of the picture brighter, and automatically corrects the brightness and contrast of the picture to make the bright parts clearer.
Reduce jelly effect distortion in images
The image distortion caused by the jelly effect of the roller shutter when shooting rapidly moving targets will be suppressed and reduced.
Transparent fog (low/medium/high)
When the surrounding area of the shooting target is foggy or low contrast, the through fog mode can reduce the impact of fog, making the shooting target appear clearer in the image. You can choose to use four different gears: off, low, medium, and high.
The effect of each gear will be automatically adjusted according to the concentration of fog.
Noise Reduction (NR)
The noise reduction function removes image noise (random and non random) to provide clearer image effects
Privacy masking
Privacy blocking areas protect the privacy of personal targets and areas, such as the windows and entrances of houses that are within the camera's shooting range but do not belong to the monitoring area.
The privacy blocking area function can be set to block the areas in these images to protect privacy.
Each screen can be set with 8 occlusion areas
Each occluded area can be individually set to display on/off.
Product Parameters
|
Basic Specifications |
|
|
FCB-EV9500L |
|
|
(Full HD LVDS) |
|
|
Image sensor (effective pixel count) |
1/1.8-inch type STARVIStm CMOS Sensor (approx. 4.17 million pixels) |
|
Output image (H×V) |
1920x1080, 1280x720 |
|
signal system |
1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.950, 720p/ 720p/30, 720p/29.97, 720p/25 |
|
Minimum illumination (50%,High Sensitivity Mode ON) |
ICR-Off mode: 0.009 lx(Shutter Speed: 1/30 s), 0,0012 lx(Shutter Speed: 1/4 s or 1/3 s) ICR-On mode: 0.00008 lx (Shutter Speed: 1/30 s),0.000005 lx (Shutter Speed: 1/4 s or 1/3 s, 30%) |
|
Minimum illumination (50%,High Sensitivity Mode OFF) |
ICR-Off mode: 0.09 lx (Shutter Speed: 1 /30 s), 0.012 lx (Shutter Speed: 1/4 s or 1/3 s) ICR-On mode: 0.00063 lx (Shutter Speed: 1/30 s) |
|
Recommended illuminance |
100 lx-100,000 lx |
|
Image S/N |
50 dB (weighted) |
|
gain |
Auto/Manual (0 dB - 50.0 dB), 0 - 28 steps |
|
shutter |
1/1 -1/10000s, 22 steps |
|
synchronization system |
Intrasync |
|
exposure control |
0 dB to ±10.5 dB, 15 steps |
|
BLC |
have |
|
Gamma |
Standard/Linear gamma |
|
Aperture control |
16 steps |
|
white balance |
Auto, ATW, Indoor, 0outdoor, One Push WB, Manual WB, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto), Spot AWB |
|
Auto Exposure Mode |
Full Auto, Manual, Priority mode (shutter/iris), EV compensation, Spot AE, Slow AE |
|
zoom |
30x Enhanced Optical Zoom 36x StableZoom *2 12x Digital Zoom |
|
Lens (wide to tele) |
f = 6.5 mm -162.5 mm, F1.6 - 4.8 |
|
zoom mode |
Standard Mode / Variable Mode / Direct Mode |
|
zoom speed |
|
|
Wide end to Tele end |
4.8 s (Focus Tracking ON), 2.9 s (Focus Tracking OFF) |
|
Wide end to Digital 12x tele |
6.1s (29.97p/59.94p), 6.4s (25p/50p) |
|
Digital wide to Digital 12xtele |
1.4s (29.97p/59.94p), 1.6s (25p/50p) |
|
focus mode |
Auto Focus (Normal AF, Interval AF, Zoom Trigger AF [Sensitivity: norma, low]), Manual (Standard, Variable, Direct), One Push Trigger, Full Scan One Push Trigger, Near Limit, ICR-on Correction, Spot Focus |
|
Focus speed |
∞ to Near: 1.4 s |
|
Horizontal field of view |
58.1° to 2.3° |
|
Minimum optical focus distance (wide end to tele end) |
100mm -1200mm |
Camera Features
|
Wide Dynamic (Wide-D) |
have |
|
can be enhanced |
have |
|
through fog |
Yes (low/medium/high) |
|
Noise reduction |
Yes (3D+2D/separately set 3D, 2D) |
|
progressive scan mode |
have |
|
Image stabilization |
Yes: Super image stabilization (Super/Super+*3) |
|
point light avoidance |
have |
|
motion detection |
have |
|
Privacy mask area |
have |
|
alarm |
have |
|
slow exposure response |
have |
|
image effects |
Black and white (grayscale image) |
|
image freeze |
have |
|
Electronic Flip (E-FLIP) |
have |
|
Image mirroring |
have |
|
slow shutter |
have |
|
temperature reading |
have |
|
subtitle display |
Yes (20 letters/line, up to 11 lines) |
|
Camera mode display |
Yes (English) |
interface
|
video output |
Digital : Y/Pb/Pr 4:2:2 (LVDS) (Y: 8 bit, C: 8 bit, Vsync, Hsync, Field, Clock) (SMPTE274M/SMPTE296M) |
|
Camera Control Interface |
VISCA protocol (CMOS 3.3V Level, 5.5V tolerance); Baud Rate : 9.6 kbps, 19.2 kbps, 38.4 kbps, 115.2 kbps, Stop bit: 1 bit |
conventional
|
power supply |
7.0V-12.0VDC |
|
Power consumption |
6.1 W (when the motor operates: 7.8W) |
|
Operating temperature |
-5 °C to +60 °C |
|
stored temperature |
-20°C to +60X |
|
Working humidity |
20% to 80% |
|
Storage humidity |
20% to 95% |
|
Appearance (WxHxD) |
56.0 x 64.0 x 125mm |
|
weight |
About 439g |
*1 When 2688x1512 or 2560x1440 image is output, the image with black frame is output under the 2160P signal system.
*2 StableZoom increases the zoom factor by combining optical zoom and digital zoom.
*3 FCB-EW9500H: 1080p, 1080i, 720p only.
*4 Y/Pb/Pr is not supported at 1080i/60, 1080i/59.94, 1080i/50.
+8613798538021