Network cameras are security and surveillance devices. With the rapid development of video and image informatization, safe and reliable cameras have become priority products for various industries. Most network cameras are installed outdoors, so waterproof performance is essential for them. Below, the editor from Kaimorui introduces the waterproof testing methods for network cameras.

Testing Procedures

1. Place the network camera into the rain‑spray and dust‑proof test chamber.
2. Secure the network camera onto the rotating platform inside the chamber. Spray high‑pressure water jets at 360‑degree all‑angle coverage, with the water flow rate set to 100 L/min (6000 L/H).
3. Close the chamber door and set the test duration, normally within 3 minutes. Configure the pressure difference inside the chamber, which shall not exceed 2 kPa.
4. Press the start button to launch the test.

That concludes the sharing of relevant content. If you have any questions regarding waterproof testing methods for network cameras, please feel free to consult our staff. We will be glad to offer you services.