Nowadays, to meet the demand for full high-definition formats and deliver high-quality, high-resolution images, an IP camera needs to be connected to a 4K control board. This enables output of ultra-high-definition HDMI video signals for superior image quality and resolution. Wondering how to connect an IP camera to a 4K control board? Kaimorui provides the guide below:

Connection Steps for IP Camera and 4K Control Board (Taking SONY FCB-CR8530 as an Example)

1. Connect the SONY FCB-CR8530 with the LVDS cable Ensure the gold fingers of the LVDS cable face upward, then insert it parallel into the LVDS port of the SONY FCB-CR8530 camera module. Avoid skewed insertion, as misalignment may cause a short circuit.
2. Connect the LVDS cable to the 4K HDMI control board Insert the LVDS cable into the 4K HDMI control board in the same parallel manner.
3. Connect the HDMI cable between the monitor and the 4K HDMI control board Plug one end of the HDMI cable into a 4K monitor, and the other end into the 4K HDMI control board. To reduce overall size, this 4K HDMI control board adopts a MINI HDMI port.

Note: The connected TV or monitor must be 4K-capable, otherwise no image will be displayed.

1. Connect the power cable Apply power. Once powered on, the camera image will appear. Boot-up screen displays parameters including baud rate and address code.

Observe the two red LEDs on the control board: one stays steadily lit, while the other flashes continuously. The steady red LED is the power indicator; the flashing red LED indicates firmware is running. Press and hold the 5-direction button for 5 seconds to bring up the parameter menu for FCB-CR/ER8530. You may adjust parameters via the five directional keys. The up and down keys on the 5-direction button control zoom in / zoom out of the FCB-CR/ER8530 module image.

In summary, these are the connection procedures. The SONY FCB-CR8530 is Sony’s new-generation 4K UHD camera module with a 20× optical zoom lens and 2160P resolution. Paired with the 4K HDMI encoding control board from Xuanzhan Vels, it forms an integrated camera module. This setup allows video captured by the FCB-CR/ER8530 integrated camera to be displayed on 4K UHD monitors. It supports English OSD menus, and the buttons can be used for zoom, focus and other functions.