How to Clean the Lens of Hikvision DS-2ZMN3607(C)
Source:Shenzhen Kai Mo Rui Electronic Technology Co. LTD2026-11-14
The lens is the “eye” of a camera. Only by keeping the lens clean can clear images be obtained. When shooting outdoors, the lens surface is inevitably contaminated by fingerprints, dust and other stains. If not cleaned in a timely manner, these contaminants may even corrode the coating on the lens surface. How should the lens of Hikvision DS-2ZMN3607(C) be cleaned? Below is the guidance shared by Kaimorui.

Lens Cleaning Procedures for Hikvision DS-2ZMN3607(C)
- Cover the lens shield when the DS-2ZMN3607(C) lens is not in use or during shooting intervals to prevent dust adhesion. If dust settles on the lens surface, use an air blower with a soft brush to blow away loose dust. For stubborn dust that cannot be blown off, gently brush it away with the soft brush, or roll several lens cleaning papers around a cotton swab to lightly remove dust. Never crumple lens cleaning paper into a ball or wipe the lens with absorbent cotton. Friction in this way will turn dust particles into abrasives and damage the coating on the lens surface.
- Use dedicated cleaning solution to remove stubborn water stains, oil stains, fingerprints and other smudges on the lens surface.
- When dust is spotted on the lens, gently wipe it off with soft cloth designed for eyeglasses or camera lenses. For dust on lens edges or other hard-to-reach areas, use an air blower or fine cotton swabs.
- Do not blow dust off the lens with your mouth during cleaning, as saliva droplets may land on the lens and cause worse stains. Avoid cotton wrapped around sharp bamboo sticks or wooden sticks for forceful wiping, which can easily scratch the lens. Never use handkerchiefs or clothing to wipe the lens.
- While cleaning the DS-2ZMN3607(C) lens, remember to wipe the inner side of the lens shield. Dust tends to accumulate on the inner surface of the shield during operation, so it should be cleaned together with the lens.
- The DS-2ZMN3607(C) lens is a precision optical component. Any damage may compromise its optical performance. Daily care is required to protect the lens from extrusion, impact, sudden temperature changes, direct sunlight, rain and moisture.
The above covers the cleaning guidelines for the Hikvision DS-2ZMN3607(C) lens. Please contact Kaimorui staff if you have any questions; we will be glad to assist you.
Related News
Key Performance of FCB‑EV7310 & CV7310
2026-11-14How to Clean the Lens of Hikvision DS-2ZMN3607(C)
2026-11-14Main Features of DS-2ZMN3008(C)
2026-11-13Safety Precautions for Hikvision DS-2ZMN2008(C)
2026-11-13Product Features of Hikvision DS-2ZMN0409S
2026-11-12Design Principles for Implementing Smart IP Camera Solutions
2026-11-12






+8613798538021