Product Introduction
KC-11J digital guide station is a recording guide switch equipment, it has both central control equipment, guide keyboard guide control function, but also the local LCD display and touch the function of the guide. Can be independently installed on the podium, to facilitate the teacher independent operation and filming; can also be installed in the guide control room, to facilitate the guide staff quickly guide, record, broadcast.
Product Parameters
ial number interface
1 Power port: DC 12V 8 Interface silk screen: KC-11J interface silk screen
2 RS-IN: Data input interface, support RS232, RS485 signal input, mainly used for data communication between recording and broadcasting host and KC-11J (pan-tilt, switching command, touch command, etc.). 9 PTZ joystick: 3D stereo PTZ control joystick, which can control the pan/tilt rotation, zoom in and zoom out and select functions.
3 RS-LOOPOUT: Data loop output interface, which can be connected to peripheral devices (auxiliary PTZ camera, director control keyboard, etc.), and data loops out directly from this port without passing through the recording and broadcasting host. 10 POWER: KC-11J power touch button.
4 LINE-OUT: Sound output interface, 3.5 headphone jack, which can be connected to power amplifier speaker equipment. Output HDMI-IN and LINE-IN incoming sound. 11 SW button: switch button, the function of the number buttons 1-6 below SW can be channel switching and corresponding channel presets. The SW touch button is used to switch functions (switching between the two functions of channel and preset), and the 1-6 number keys can be used normally when switching to the corresponding function.
5 HDMI-IN: HDMI signal input interface, access to the HDMI-OUT signal of the recording host (recording guide interface, with sound). 12 Number buttons: Same as above 11 points, can be used to switch the preset position of the corresponding channel, and can also be used as a switch button for recording and broadcasting 1-6 channels.
6 VGA-IN: VGA signal input interface, access to the VGA-OUT signal of the recording host (recording guide interface). 13 LCD touch screen: 11-inch high-definition LCD touch screen, which can display and touch the recording and broadcasting host guide interface.
7 LINE-IN: Sound input interface, with VGA-IN, VGA cannot transmit sound. If VGA-IN is connected to the recording and broadcasting director interface, the sound of the recording and broadcasting PGM is input from this interface.
1 Power port: DC 12V 8 Interface silk screen: KC-11J interface silk screen
2 RS-IN: Data input interface, support RS232, RS485 signal input, mainly used for data communication between recording and broadcasting host and KC-11J (pan-tilt, switching command, touch command, etc.). 9 PTZ joystick: 3D stereo PTZ control joystick, which can control the pan/tilt rotation, zoom in and zoom out and select functions.
3 RS-LOOPOUT: Data loop output interface, which can be connected to peripheral devices (auxiliary PTZ camera, director control keyboard, etc.), and data loops out directly from this port without passing through the recording and broadcasting host. 10 POWER: KC-11J power touch button.
4 LINE-OUT: Sound output interface, 3.5 headphone jack, which can be connected to power amplifier speaker equipment. Output HDMI-IN and LINE-IN incoming sound. 11 SW button: switch button, the function of the number buttons 1-6 below SW can be channel switching and corresponding channel presets. The SW touch button is used to switch functions (switching between the two functions of channel and preset), and the 1-6 number keys can be used normally when switching to the corresponding function.
5 HDMI-IN: HDMI signal input interface, access to the HDMI-OUT signal of the recording host (recording guide interface, with sound). 12 Number buttons: Same as above 11 points, can be used to switch the preset position of the corresponding channel, and can also be used as a switch button for recording and broadcasting 1-6 channels.
6 VGA-IN: VGA signal input interface, access to the VGA-OUT signal of the recording host (recording guide interface). 13 LCD touch screen: 11-inch high-definition LCD touch screen, which can display and touch the recording and broadcasting host guide interface.
7 LINE-IN: Sound input interface, with VGA-IN, VGA cannot transmit sound. If VGA-IN is connected to the recording and broadcasting director interface, the sound of the recording and broadcasting PGM is input from this interface.
+8613798538021