Product Introduction
CM-PV200P
PTZ control algorithm for precise, smooth, and quiet positioning
Equipped with advanced control algorithms and precision motor drive, the operation is very quiet, smooth, and stable. It can accurately and quickly move to the designated position and perform large-scale shooting.
True full HD high-definition images
Using a high-quality Exmor R CMOS Sensor sensor with 1/2.8 inch and 2.07 million effective pixels, it can achieve high-quality images with 1920 × 1080 resolution. While ensuring high definition, the focus is on meeting the demand for smooth image quality.
Low noise and high signal-to-noise ratio
2D and motion estimation based 3D denoising algorithms were applied, and a new generation of low-noise sensors were used to effectively reduce noise.
Supports 20x multiple optical lenses matched with 12x digital zoom
20X optical zoom, 12x digital zoom
Full HD HDMI video output
Supports multiple high-definition video formats such as 1080P60/59.94/50/30/29.97/25, 720P60/50, etc.
Full HD USB 3.0 video output
Supports multiple high-definition video formats such as 1080P 60/50/30/25 and 720P 60/30.
High definition network video output
Supports multiple high-definition video formats such as 1080P 60/50/30/25720 P60/50.
3GSDI video output
Supports multiple high-definition video formats such as 1080P60/59.94/50/30/29.97/25, 720P60/50, etc.
Supports TF card recording function (only supports UH series)
Supports TF card recording function, supports recording in multiple time periods, and supports audio recording.
Support automatic tracking function (speaker mode)
It can quickly track the target person, especially suitable for speech and training scenarios.
255 preset positions
255 positions can be pre-set through the serial port, including horizontal, pitch, and zoom settings. Even when the camera is powered off, the preset data can be saved.
Multi functional remote control
Equipped with an easy-to-use remote control, in addition to basic settings and control of horizontal, pitch, zoom, etc., the camera's relevant parameters can also be set through the remote control menu.
OSD Chinese and English menu functions
Rich OSD menu, which can be controlled with a remote control in both Chinese and English OSD menus.
Product Parameters
camera | ||
signal system | 1080P60/59.94/50/30/29.97/25 、720P60/50 | |
sensor | A 1 / 2.8-inch high-quality CMOS sensor, with 2.07 megapixels | |
scanning mode | non interlaced | |
Digital zoom | 12x | |
minimal illumination | Support for ultra-low illumination: 0.1 Lux @ F 1.6 (color), 0.01 Lux @ F 1.6 (black and white) | |
shutter | 1/30s ~ 1/10000s | |
white balance | Automatic, indoor, outdoor, and manual work | |
Backlight compensation | support | |
Digital noise reduction | 2D & 3D digital noise reduction | |
noise-signal ratio | ≥52dB | |
Horizontal field of view angle | 20X: 58° (wide-angle end) ~2.9° (distal end) f=5.5~110mm | |
Horizontal rotation range | ±170º | |
Vertical rotation range | -30° ~ +90° | |
Horizontal rotation speed range | 1 º/s ~ 100 º/s | |
Vertical rotation speed range | 1 º/s ~ 60 º/s | |
Horizontal and vertical flip | support | |
Number of prepositions | 255 | |
Preposition accuracy | ±0.1° | |
inputoutput interface | ||
HD vide interface | HDMI | Support 1080P60/59.94/50/30/29.97/25,720P60 / 50 and other HD video systems |
3GSDI | Support 1080P60/59.94/50/30/29.97/25,720P60 / 50 and other HD video systems | |
USB3.0 | Support for USB3.0 video output, up to 1080P60 | |
TF Card | Note: Only the UH series are supported. Support TF card recording function, support a variety of time period recording, support audio recording. | |
Network mouth | Code: H.265/H.264/MJPEG, Network Protocol: IPv4, TCP, UDP, HTTP, NTP, DNS, DHCP, ARP, RTSP, RTP, RTCP, RTMP, NDI, ONVIF,, VISCA OVER IP, | |
communication interface | 1 route, RS-232 IN, maximum distance: 30 m, VISCA / Pelco-D / Pelco-P protocol Route 1 route, RS-422, maximum distance: 1200 m, VISCA / Pelco-D / Pelco-P protocol | |
Power interface | JEITA Type (DC IN 12V) HEC3800 | |
General specification | ||
input voltage | To transfer from AC110V-AC220V to DC12V/1.5A | |
input currenton | DC12V(DC11.5-DC12.5V) | |
working temperature | 0℃ to + 45℃ | |
Storage temperature | From-10℃ to + 60℃ | |
power dissipation | 12W (max.) | |
Body size | Refer to the Installation Dimension Drawing | |
packing measurement | 355mmX270mmX255mm | |
Weight (net weight) | 2KG(1.2KG) | |
+8613798538021