Product Introduction
Product Parameters
Model |
FCB-EX480CP&FCB-CX480CP |
Image Sensor |
1/4-inch EXview HAD CCD |
Effective Pixels |
440,000 pixels |
Lens |
18x optical zoom, f=4.1mm (wide end) to 73.8mm (far end), F1.4 to F3.0 |
Digital zoom |
12x (216x zoom) |
Viewing angle (horizontal direction) |
48.0 (wide-angle end) to 2.8 (far end) |
Minimum working distance |
35mm (wide-angle end) to 800mm (far end) |
Supported synchronization systems |
Internal/external synchronization (V-LOCK) |
Minimum Illumination |
0.7 lx ( F1.4 50IRE) |
Signal-to-noise ratio |
Greater than 50dB |
Electronic shutter |
1/1 to 1/10000 sec, 22 steps |
White Balance |
Auto White Balance, Auto Tracking White Balance, Indoor, Outdoor, One Touch, Manual |
Gain |
Auto/Manual (-3 to 28dB, 2dB per step) |
AE Control |
Auto, manual, priority mode, brightness, EV compensation, backlight compensation |
EV compensation |
-10.5 to +10.5dB (1.5dB per step) |
Backlight compensation |
On/Off |
Privacy area masking |
24 pieces |
Focusing System |
Auto (sensitivity: normal, low), one-touch autofocus, manual, alternate AF, zoom trigger AF |
Supported image effects |
Electronic flip, inversion effect, black and white, mirror effect |
Camera operation buttons |
Zoom (far end, wide-angle end) |
Support for user design |
VBS:1.0Vp-p (negative sync), Y/C output |
Camera control interface |
VISCA (TTL signal level), baud rate: 9.6kb/s, 19.2kb/s, 38.4kb/s, stop bit: 1/2 selectable |
Storage temperature |
-20℃ to 60℃ |
Operating temperature |
0 to 50°C |
Power consumption |
6 to 12V DC/1.6W (motor inactive), 2.5W (motor active) |
Weight |
About 230g |
Dimension (W×H×D) |
52×57.5×88.5mm |