Product Introduction
Product Parameters
model |
FCB-EX990D |
FCB-EX990DP |
image sensor |
1 / 4 inch view had CCD |
|
signalling system |
NTSC |
PAL |
Effective pixel |
380000 pixels |
440,000pixel |
Horizontal resolution |
Turn on high resolution mode: 530 TV line (detaulf) Turn on high resolution mode: 470 TV line (NTSC) / 460 TV line (PAL) |
|
camera lens |
26Double optical zoom F = 3.5mm (wide end) to 91.0mm (distal end), f1.6 to f3.8 |
|
The number is doubled |
12x (312x optical zoom) |
|
Viewing angle (horizontal) |
54.2°(Wide end) to 2.2°((far end)
|
|
TV distortion |
- |
|
Minimum object distance |
320Mm (wide end) to 1500mm (far end) |
|
synchronous system |
Internal / external (V-LOCK) |
|
Minimum illumination |
1 / 60s mode: 1.0lx (typical) (f1.6,50 IRE) 1 / 4S mode: 0.09lx (typical) (f1.6,50 IRE) |
|
Automatic ICR |
yes |
|
Image stabilizer |
nothing |
|
Video move delete |
yes |
|
Multi line OSD |
Yes (up to 11 lines, 20 channels per line) |
|
Slow acoustic emission response |
yes |
|
E-hp |
yes |
|
Image detection |
yes |
|
Slow shutter |
yes |
|
Video output |
VBS: 1.0vp-p (negative synchronization), Y / C |
|
Camera assembly control interface |
Visca (TTL signal level), baud rate: 9.6kb/s, 19.2kb/s, 38.4kb/s, stop bit: 1 or 2 bits |
|
Signal to noise ratio |
Above 50 dB |
|
shutter speed |
1/1To 1 / 10000 seconds, a total of 22 steps |
|
white balance |
Automatic, automatic tracking, white balance, indoor, outdoor, one button, manual |
|
gain |
Auto / manual (- 3dB to 28dB, 2dB steps) |
|
Automatic exposure control |
Auto, manual, priority mode (shutter priority and aperture priority), brightness, ev compensation, backlight compensation, slow AE |
|
Wide dynamic range |
On / off |
|
Backlight compensation |
On / off |
|
Privacy zone masking |
On / off (each screen's masking area / when combined with pan tilt and lens zooming, the entire monitoring area can be preset with 24 masking areas, 8 blocks per screen, supporting 14 kinds of colors and mosaics) |
|
Character generator |
Mode display / multi line OSD (OSD display takes precedence over mode display) |
|
Flicker elimination |
(automatic) |
- |
Focusing system |
Auto (sensitivity: normal, low), one touch AF, manual, infinity, interval AF, zoom trigger AF |
|
Support image effects |
Electronic flip, negative effect, black & white, mirror image |
|
Zoom switch |
Far end |
|
Storage temperature |
-4To 140°F (- 20 ℃ to 60 ℃) |
|
working temperature |
32To 122°F (0 ℃ to 50 ℃) |
|
Power requirements |
6.0V to 12.0V DC |
|
power waste |
2.6W (motor not started), 5.4w (motor start) |
|
weight |
230g |
|
size |
55.3x 57.5 x 88.5mm |