1. The horizontal and vertical movement of PTZ can be realized, and the wiper function is optional.
2. The horizontal direction is 360 degrees, the vertical direction is 0 degrees to 90 degrees, and the final vertical movement range angle needs to be adjusted according to the machine
The structure of the machinery should be adjusted.
3. Realize the preset function, automatic scanning function, automatic cruise function, guard function.
4. Soft address function (optional), dial code to achieve 1 ~ - 255 address optional, communication baud rate dial code selection.
5. Realize TTL, three variable voltage drive camera output at the same time.
6. The Board reserves the network movement interface, the camera automatically identifies, and can access the analog / network movement and integrated camera.
7. Provide horizontal, vertical, wiper interface (Note: switch module is optional).
8. The main board power supply mode can be two groups of power supply (motor and control are separated) and one group of power supply (motor and control are the same group of power supply).
9. Infrared lamp provides two IO and a photosensitive access, can be external infrared lamp board (default).
10. PTZ control protocol supports pelcod, pelcop, etc., camera control protocol supports visca, samsumg, LG, CNB
Note: the motor of this motherboard is a four wire stepping motor.