Shenzhen Kai Mo Rui Electronic Technology Co. LTDShenzhen Kai Mo Rui Electronic Technology Co. LTD

News

# What Causes Lagging in Network Surveillance Cameras?

Source:Shenzhen Kai Mo Rui Electronic Technology Co. LTD2026-11-18

With the development of digital network‑based surveillance technology, digital network surveillance camera systems are gradually replacing traditional analog surveillance systems. After network surveillance cameras have been installed and put into use for some time, users may encounter lagging video feeds. Do you know what gives rise to this issue? Below, specialists from Kaimorui walk you through the contributing factors.

9.jpg

Causes of video lag:

  1. Poor‑quality network cables Low‑grade non‑copper network cables may be deployed. Standard compliant network cables are recommended for transmission distances no greater than 100 meters. Inferior cables deliver far poorer transmission performance. While video may appear normal at first, signal loss and intermittent connectivity along with frame lag can emerge later as cables suffer oxidation and signal attenuation. It is advised to use high‑quality national‑standard network cables during installation and construction.
  2. Network environment For Wi‑Fi home surveillance cameras, roughly 90 % of lagging incidents stem from unsatisfactory network conditions. Insufficient power supply to the camera accounts for around 5 % of such faults, and insufficient memory on the mobile viewing device for another 5 %.
  3. Defective hardware from purchase Users may buy sub‑standard cameras from manufacturers with inadequate technical capabilities. Such cameras tend to produce lagging video after prolonged operation. The solution is to replace them with high‑quality surveillance cameras.
  4. Insufficient NVR resources In many surveillance projects, NVRs are operated at full capacity, or high‑resolution cameras are connected beyond the NVR’s processing limits. Insufficient NVR resources will result in choppy playback or blank screens. This can be mitigated by lowering the bitrate or reducing the number of connected cameras.

Above are several common causes for lagging in network surveillance cameras. Reducing bitrate or frame rate can improve video smoothness, yet this comes at the cost of image clarity. This workaround is not recommended for scenarios requiring high‑definition footage; instead, root causes should be identified for proper troubleshooting.

Related News

Professional Engineer

24-hour online serviceSubmit requirements and quickly customize solutions for you

+8613798538021